TAC-10.03N
Dead-end and jumper terminal pads are each produced with a 15° angle to permit the terminal to be bolted in either the straight or 30° offset position.
1/2-13 UNC galvanized steel bolts, nuts and washers are supplied with each jumper terminal.
Jumper terminals are filled with Cicame jointing compound, end closed with cap.
Dies for Model 6-TON tool have prefix WD. (max size CSA-24)
Dies for Model 12-TON tool have prefix CD. (max size CSA-30)
Dies for Models 60-TON tool have prefix JD.
Dies for Model 100-TON tool have prefix D.
Example: WDA-5, CDA-7, JDA-7, DA-7.
See tooling section for more information on dies.
Cables : All aluminum alloy conductors (AASC)
Connectors : jumper terminal, compression
TAC-10.03N
Data sheet
- Cable Name
- 255 mm²-STR-AASC
477 KCMIL - 19 - 21.59 dia
477.0 kcmil 19 str.-477-STR-AASC/6101/HS
Darien / AAAC - AWG ou KCMIL
- 255 mm²-STR-AASC
477.0
559.5 - Stranding
- 19
- Cable Diameter min. (mm)
- 21.59
- A (mm)
- 303
- B ( mm )
- 127
- Holes Range
- 4
- Approx. Weight (Kg)
- 0.87
- Hole Diameter
- 14.3
- Standard Version
- FIG.8
- Other Version Available
- FIG.6
- Cicame Die
- A-10
- CSA Die
- CSA-32