TAC-7.02N
Dead-end and jumper terminal pads are each produced with a 15° angle to permit the terminal to be bolted in either the straight or 30° offset position.
1/2-13 UNC galvanized steel bolts, nuts and washers are supplied with each jumper terminal.
Jumper terminals are filled with Cicame jointing compound, end closed with cap.
Dies for Model 6-TON tool have prefix WD. (max size CSA-24)
Dies for Model 12-TON tool have prefix CD. (max size CSA-30)
Dies for Models 60-TON tool have prefix JD.
Dies for Model 100-TON tool have prefix D.
Example: WDA-5, CDA-7, JDA-7, DA-7.
See tooling section for more information on dies.
Cables : All aluminum alloy conductors (AASC)
Connectors : jumper terminal, compression
TAC-7.02N
Data sheet
- Cable Name
- Oak
Vancouver - AWG ou KCMIL
- 4/0
100 mm² - Stranding
- 7
19 - Cable Diameter min. (mm)
- 14.21
14.38 - A (mm)
- 270
- B ( mm )
- 115
- Holes Range
- 2
- Approx. Weight (Kg)
- 0.44
- Hole Diameter
- 14.3
- Standard Version
- FIG.4
- Other Version Available
- FIG.1-2-3-6-8
- Cicame Die
- A-7
- CSA Die
- CSA-28