TAC-3.05N
  • TAC-3.05N
  • TAC-3.05N
  • TAC-3.05N
  • TAC-3.05N
  • TAC-3.05N

TAC-3.05N

Dead-end and jumper terminal pads are each produced with a 15° angle to permit the terminal to be bolted in either the straight or 30° offset position.
1/2-13 UNC galvanized steel bolts, nuts and washers are supplied with each jumper terminal.
Jumper terminals are filled with Cicame jointing compound, end closed with cap.

Dies for Model 6-TON tool have prefix WD. (max size CSA-24)
Dies for Model 12-TON tool have prefix CD. (max size CSA-30)
Dies for Models 60-TON tool have prefix JD.
Dies for Model 100-TON tool have prefix D.
Example: WDA-5, CDA-7, JDA-7, DA-7.
See tooling section for more information on dies.

Cables : All aluminum alloy conductors (AASC)
Connectors : jumper terminal, compression

TAC-3.05N

Data sheet

Stranding
7
Cable Diameter min. (mm)
7.09
A (mm)
170
B ( mm )
76
Holes Range
2
Approx. Weight (Kg)
0.21
Hole Diameter
11.1
Standard Version
FIG.3
Other Version Available
FIG.1
Cicame Die
A-3
CSA Die
CSA-20