AT-11.01N
  • AT-11.01N

AT-11.01N

Start of compression zone is indicated by marking on barrel. Dead-end and jumper terminal pads are each produced with a 15° angle to permit the terminal to be bolted in either the straight or 30° offset position. 1/2-13 UNC galvanized steel bolts, nuts and washers are supplied with each jumper terminal. Jumper terminals are filled with Cicame jointing compound. Dies for Model 12-TON Compresor have prefix CD. Dies for Models J-60 and 60-S/D Compressor have prefix JD. Dies for Model 100-S/D Compressor have prefix D. Example: CDA-7, JDA-7, DA-7. Max. size die for Model 12-TON Compressor : CDA-85, CDS-85
AT-11.01N

Data sheet

Cable Name
Egret
Scoter
AWG ou KCMIL
636.0
Nombre de trous de diam. 14,28 de la cosse
4
A (mm)
330
B ( mm )
165
Approx. Weight (Kg)
1.552
Cicame Die
A-11
CSA Die
34