AT-7.07N
  • AT-7.07N

AT-7.07N

Start of compression zone is indicated by marking on barrel. Dead-end and jumper terminal pads are each produced with a 15° angle to permit the terminal to be bolted in either the straight or 30° offset position. 1/2-13 UNC galvanized steel bolts, nuts and washers are supplied with each jumper terminal. Jumper terminals are filled with Cicame jointing compound. Dies for Model 12-TON Compresor have prefix CD. Dies for Models J-60 and 60-S/D Compressor have prefix JD. Dies for Model 100-S/D Compressor have prefix D. Example: CDA-7, JDA-7, DA-7. Max. size die for Model 12-TON Compressor : CDA-85, CDS-85
AT-7.07N

Data sheet

Cable Name
400 KCMIL 19
Canna
Caracal
Erne / SD
Linnet
Linnet / SD
Oriole
Wolf
AWG ou KCMIL
150 mm²
175 mm²
336.4
397.5
400
477.0
Nombre de trous de diam. 14,28 de la cosse
2
A (mm)
254
B ( mm )
114
Approx. Weight (Kg)
0.65
Cicame Die
A-7
CSA Die
28